AVer EH1116H-4 series quick guide - Manual (Page 11)

7
QUICK USER GUIDE
c. Select the hard disk from list.
d. Click Format button and click Start to begin formatting
e. When formatting is done, click OK.
6. Adjust time and date: Setup the DVR system date and time in order to have correct recording
time and date. Following the below steps to setup date and time:
a. Click Setup and enter the password (If this is the first time, enter the default password
[admin]. The default ID [admin]).
b. Select System.
c. In Date and Time Setting, click Setting button of System Date and Time.
d. Select the Year and Month by click arrow button, click on the date to select the date. And
adjust the time, and then, click OK.
7. Connecting the cameras: DVR supports IP and Analog camera.
Analog camera
a. Connect the analog camera video cable to video cable.
b. Click Setup → Camera
c. Select camera channel and mark Enable to enable the channel.
d. Select Input as Analog Camera.
e. In Camera section, mark Display to allow the live video of camera to display on
surveillance screen. And then, enter the Name and Description of the channel. Mark
Enable Audio to record the sound. For example: The camera 1 is connected with audio
channel 2, then, user needs to select audio channel 2 as camera 1
’s audio channel
(audio connection refer to Device Connecting section).
f. Adjust the bright, contrast, hue, and saturation of the camera.
g. Click OK.