AVer SPB370 user manual - Manual (Page 9)

E-5
English
Deutsch
Français
Italiano
Es
pa
ñol
Č
esky
Connecting a Monitor or LCD/DLP Projector with DVI
interface
Locate the DVI input port of the display device and connect it to DVI-I OUTPUT port of
SPB370.
Make sure the Video Output switch is set to RGB.
RGB OU TPUT DC 12V VID EO OUTPUT S-VIDEO
OUTPUT DVI-I OUTPUT USB SD CARD
LCD/DLP projector
with DVI interface
LCD Monitor
with DVI interface
DVI cable
(not supplied)
Connecting a TV
Locate the VIDEO (yellow), S-VIDEO or SCART RGB input port of the TV or Video
equipment (i.e., VCR) to record your presentation on a videotape and connect it to S-VIDEO
or VIDEO OUTPUT port of SPB370.
- Make sure the Video Output switch is set to TV.
- For better video quality, we strongly suggest using S-VIDEO connection.
RGB OUTPUT DC 12V VIDEO OUTPUT S-VIDEO
OUTPUT DVI-I OUTPUT USB SD CARD
S-Video cable
S-Video to SCART cable
(not supplied)
S-VIDEO
RCA to SCART cable
(not supplied)
RCA cable VIDEO
SCART
SCART
I N P U T
P r o j e c t o r
Te l e v i s i o n
V C R