AVer CP130 user manual - Manual (Page 16)

E-12
Function Description
(8) SOURCE Switch between Camera, Playback and PC mode.
- Camera mode displays the video signal from the
built-in camera.
SLIDE SHOW
START
INTERVAL
- Playback mode displays the captured image from
the built-in memory in 16-thumbnail images. Use
▲,▼,◄, & ► buttons to make a selection and
ENTER to display the selected image in full
screen. To start slide show press MENU and
select START and press ENTER to begin and
end. Select INTERVAL to set the display time
interval between frames in second.
- PC mode displays the video signal from the RGB
INPUT port of AVerVision CP130.
(9) AUTO IMAGE Automatically adjust and set the white balance and
exposure setting.
(10) CAP/DEL - Capture a still image in Camera mode. The
captured image is saved in the built-in memory at
1024 x 768 resolution and can store up to 40
images.
- Remove the selected picture from the built-in
memory permanently in Playback mode.
(11) EFFECT Convert and display the image in BW, Negative or
Color in Camera and Playback mode only.