AVer VP-1HD User Manual
Page 10
4
M
M
a
a
k
k
i
i
n
n
g
g
t
t
h
h
e
e
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
The ports on the rear and right panel of VP-1HD enable you to connect the unit to a computer; graphics display monitor or LCD/DLP projector, TV or
other device. Illustrated below are the ports and switches that are located at the rear, and right panel of VP-1HD with their corresponding labels.
(2)
(3)
(1)
(5)
(6)
(7)
(4)
(8)
Port
Description
(1) DC 12V
Connect the power adapter into this port.
(2) HDMI Port
Output the video signal from the camera on an LCD
monitor with HDMI interface using HDMI cable.
(3) RGB OUT
Output the signal from the camera, or RGB IN port on a
VGA/Mac monitor or LCD/DLP projector.
(4) RGB IN
Input the signal from a computer or other sources and pass
it through to the RGB OUT port only.
Connect this port to the VGA output port of the computer.
(5) OTG Port
To connect external USB flash drive for data storage (ex:
record video, capture image…etc.)(Also see
External
Memory Storage
section).
(6) OTG-USB Switch
Switch function from OTG port to mini USB port.
(7) Mini USB Port
Connect to a mini USB port of a computer with a USB
cable and use AVerVision VP-1HD as a USB Camera or
transfer the captured images/videos either from the
memory source to computer.
(8) Antitheft Slot
Attach a Kensington compatible security lock or antitheft
device.