AVer M70 - Manual (Page 10)

ENGLISH
5
Remote Control
The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries
are installed properly before use. You can access all the features of AVerVision M70 with
the remote.
Name Function
RM- NM
(11)
(6)
(17)
(22)
(21)
(19)
(20)
(23)
(26)
(1)
(9)
(13)
(15)
(5)
(24)
(25)
(7)
(2)
(4)
(3)
(8)
(10)
(16)
(14)
(12)
(18)
(fig. 1.6)
(1) POWER Turn the unit on/standby.
(2) CAMERA / PC Switch between Camera and computer
mode.
- Camera mode displays the video
signal from the built-in camera.
- PC mode displays the video signal
from the RGB INPUT port of M70.
(3) PLAYBACK View the captured picture/video from
the memory in 16-thumbnail images.
(4) SPOTLIGHT Call the Spotlight submenu. Spotlight
overlays a box frame on the presentation
screen. You can adjust the box size and
move it around.
In the Spotlight submenu, the following
options are available.
ON/OFF – select to run/cancel the
Spotlight. Press to move to the next
selection.
Shade – set the opacity level of the area
outside the box. The shaded area will
completely turns black when it is set to
level 100. Press to move to the next
selection.
Color – select the Spotlight frame color.
Press to move to the next selection.
OK – press for the setting to take
effect. If you select ON, the frame will
appear and blink, use the ▲,▼,◄, & ►
buttons to adjust the frame size and
press to set the desired size; and
OFF will close the submenu.
To turn off Spotlight, press
again.