Alumax K-K93Z - Manual (Page 12)

2
12
FRAME INSTALLATION
INSTALLATION MANUAL
4836 / 6036 / 6042 / 6048 / 7236
2a
INTERIOR
SHOWER SIDE 9
7
2b
INTERIOR
SHOWER SIDE
INTERIOR
SHOWER SIDE
CONNECTOR
INTERIOR
SHOWER SIDE
INTERIOR
SHOWER SIDE
Assemble the door frame with the magnetic
expander, top rail, bottom rail and the expanders
by using screws 1 1/4’’ (8). Place the magnetic
expander (11) on the side where the door will
be opening.
Assemble the frame of the return panel with the
top rail, bottom rail, connector, glass support
and the expander by using screws 1 1/4’’. The
expander for the return panel has the glass panel
installed already textured side must be towards
the outside. Place glass support as illustrated.
Insert the door frame into the wall jamb, and
return panel frame into the other. Insert both
frame into one an other by using the connector
of the return panel into the expander or magnetic
expander depending on the opening side of the
door.
Position the door frame and the return panel onto
the center of the threshold of the base by using
initial marking.
To level the frames, clamp using locking pliers the
expanders with their wall jambs and clamp the
connector to the expander as illustrated.
Secure the expanders with the wall jambs and
the connector to the expander by using the self
drilling screws #8- 1/4’’ (6) and place the caps on
the heads of an visible screws.
2a.
2b.
2c.
2d.
2e.
2f.
GLASS
BOTTOM TRACK
TOP TRACK
GLASS SUPPORT