Alumax K-K93Z - Manual (Page 10)

2
10
FRAME INSTALLATION
INSTALLATION MANUAL
Assemble the magnetic expander to the top
rail, bottom rail and the expanders by using
screws 1 1/4’’ (8). Place the magnet ex-
pander (11) on the side where the door will
close.
Insert the second wall jamb in the expender.
Insert at an angle the wall jamb on the
wall into the expender of the frame and center
the frame in the opening by stretching the wall
jambs to the wall.
Screw the second wall jamb onto the wall by
using screws 1 1/4’’ (3). The wall plugs should
already be installed in the wall. Ensure verti-
cality with the level.
Level the top rail and the bottom rail by
clamping both of the magnetic expander and
expander with their wall jambs by using vice
grips.
Secure the magnetic expander and the
expander with their wall jambs using the self
drilling screws #8- 1/4’’ (6) and place the caps
on the heads of visible screws.
2a.
2b.
2c.
2d.
2e.
2f.
48 / 60 / 72
2a
2b
INTERIOR
SHOWER SIDE
INTERIOR
SHOWER SIDE
9
7
11
INTERIOR
SHOWER SIDE