Alumax K-HSZ - Manual (Page 3)

3
● Table of Contents
MODEL NUMBER ............................................... 2
GENERAL INSTRUCTIONS .................................... 3
INSTALLATION OVER CERAMIC TILES ....................... 3
NOTICE ......................................................... 3
CARE FOR YOUR FRAMELESS SHOWER DOOR ............. 3
CHOICE OF INSTALLATION ................................... 4
PARTS LISTING ................................................. 5
PROVIDED HARDWARE ........................................ 6
TOOLS AND MATERIALS REQUIRED ......................... 7
INSTALL THE WALL JAMBS ................................... 8
MOUNT THE WALL JAMBS (CONTINUED). ................. 9
PANEL INSTALLATION. ....................................... 10
MOUNT THE DOOR........................................... 11
GASKET INSTALLATION ...................................... 12
INSTALL THE SUPPORT BAR. ............................... 13
FASTEN UNIT. ................................................. 14
INSTALL THE SHELFS. ....................................... 15
SILICON SEALING............................................. 16
● General Instructions
- Read this manual carefully and completely before
proceeding.
- It is recommended that you wear safety glasses at all
times during the installation.
● Installation over Ceramic Tiles
- Silicone should be used to seal the gap where the
ceramic tiles meet the panel.
- If your shower door is to be installed over ceramic tiles,
the tiles should lay completely under the wall jamb.
● Notice
- Caulking: no sealant is required inside the shower.
- All models are equipped with transparent sealing
gaskets.
● Care for your Frameless Shower Door
- Never use scouring powder pads or sharp instruments on
metal pieces or glass panels.
An occasional wiping down with a mild soap diluted
in water is all that is needed to keep the panels and
aluminum parts looking new.
- We recommend wiping the glass panels with a squeegee
after each use.
without notice.