11g 1e – Alumax L-CSSY User Manual

Page 7

INSTALLATION MANUAL

CONTINUED

1e.

traced previously. Mark the screw location. The clips

should be placed 1” from the edge of the glass.

Remove temporary the bottom clips to drill the

base using Ø1/8” drill bit. Put silicone onto the bot-

tom clip bottom face groove and around the hole.

Finally, fasten the bottom clips to the base using

the provided screws.Place the gaskets into bottom

clips slots.

1f.

panel has been adjusted, secure the expander to

the wall jamb by way of a clamp so as to keep the

1g.

By way of #8- 3/8 screws, as well as screw caps

secure the wall jamb to the

expander.

COVER THE PLIER’S TEETH BEFOREHAND TO

AVOID SCRATCHING THE ALUMINUM PARTS.

1e.

3.1

INTERIOR

SHOWER SIDE