Alumax L-423 - Manual (Page 12)

2c
INSTRUCTION MANUAL
2
BOTTOM CLIPS INSTALLATION
2b
CORNER CLIPS INSTALLATION
1
3 FRONT PANEL
FRONT PANEL
1
2
1
3
8
3
1
5
2a
3 1/2”
2a. Fasten bottom clips (5) at both sides of the
front panel (1) at approximately 3 ½” from
the edges.
2b.
2c. Mark on the base the location of bottom
clips (5).
Temporarily install the corner clip (8) on the
panels (1 & 3).
Align the front panel (1) to the edge of the
return panel (3) as shown. Install the front
plate of the corner clip in the slotted holes
and slide it into the holes of the return panel
(1).
A second person proceeds to tighten the
black plates of corner clip from the inside of
the shower .
Make the necessary adjustments and level
the front panel (1) by adjusting the corner
clip.
9
slots
holes
INTERIOR
SHOWER SIDE
303X, 423X, 423TBX