Alumax M-PD91X - Manual (Page 2)

- Silicone should be used to seal the line where ceramic tiles meets the side panels.
- If your shower door is to be installed over ceramic tiles, tiles should be completely under both wall jambs.
- A threshold made of aluminum is included and should be siliconed underneath the door panels in order to ensure optimal
leak protection.
- Caulking: no sealant is required inside the shower.
- All models are equipped with transparent sealing gaskets and magnetic closure gaskets.
- Threshold for leak protection is included and recommended on base without lip and ceramic base tile.
Notice
Installation over ceramic tiles
- Never use scouring powder pads or sharp instruments on metal work or glass panels.
An occasional wiping down with a mild detergent diluted in water is all that is needed to keep the panels and aluminum
parts looking new.
Care for your frameless shower door
- Read carefully and completely before proceeding.
- This shower door should be installed by a recommended installer.
- It is recommended that you wear safety glasses at all times during installation.
General Instruction
Product specifications are subject to change without notice.
Use installation instructions supplied with product.