Alumax M-PD91X - Manual (Page 10)

Loosen the glass clip (#1d). Align the slotte to the
fixed panel. The slotted screw head should be on the
inside of the shower.
1
2
3
4
5
1
2
Rest the support bar on the fixed panel inside the
tub. Level it and trace an arc on the wall.
3
Isolate the wall bracket and drill a hole, using a 1/4˝
drill bit through the wall. Locate the position of this
hole by way of the wall bracket. Insert a wall plug.
4
Secure the wall bracket to the wall by way of the
screw. Assemble the cylindrical joint to the wall
bracket.
5
Secure the glass fastener and wall bracket screws
to complete the installation process.
INSTALLATION GUIDE
ADDENDUM