Alumax M-CDPY-66 - Manual (Page 11)

INSTALLATION MANUAL
3c
3d
3 SUPPORT BAR INSTALLATION
3b
11
3d
3b
3c
Remove the suport bar and take apart the wall
end component (A) with the provided Key.
Replace the wall end component on the wall
using the marked lines.
Use a 1/4” drill bit to drill a hole into the wall
through the wall end component (A).
Apply a bead of silicone in the hole and insert
a wall plug. Use a screw to secure the wall
end component (A) to the wall .
Wall end component
A
B
A