Alumax 890 - Manual (Page 9)

Page 9 of 9 G03744439
1-27-06
15
Carefully caulk the interior jamb-to-wall and
curb-to-base joints. For appearance, you may wish to
caulk the exterior joints as well. We recommend you
wait twenty-four hours before the first shower to allow
the caulking to cure properly.
To keep your Alumax Bath Enclosure looking like new we recommend the Alumax
ShowerBright Consumer Maintenance Kit. The Consumer Maintenance Kit surface should
be applied every 45 to 60 days. To purchase or for more information contact your dealer
.
Our dealers have the materials to do a professional ShowerBright restoration. For best
results professional restorations should be performed a maximum of once every three
months. Contact your dealer for more information. New units with factory supplied
ShowerBright coating have a limited lifetime warranty. For daily cleaning the simplest and
preferred method is to wash the unit with clean water and dry with a soft cloth. Do not use
scouring pads, sharp instruments, or acid-based cleansers to clean the unit.
Consumer kits will be sold direct, consumers will need to go to dealers for
professional restoration and new units can be purchased with the permanent coating.
Consumer kit materials need to be applied every 45 to 60 days, pro materials to be applied
once quarterly max and factory has limited lifetime.
CA
UL
K