Alumax 738 - Manual (Page 2)

EPH-N00-06002
1-24-97
Page 2 of 8
LIMITED WARRANTY AND REMEDY
Alumax Bath Enclosures warrants to its dealers, customers, and all subsequent purchasers and users,
that the products supplied by it shall be free from material defects in material and workmanship for
a period of one (1) year after shipment, provided they are installed and maintained according to
Alumax Bath Enclosures recommended practices and installation instructions. This warranty shall
apply only to defects appearing within one (1) year from the date of shipment, and provided that
Alumax Bath Enclosures is promptly notified in writing of such defects. The sole and exclusive remedy
with respect to the above warranty or with respect to any other claim relating to defects or any other
condition or use of the products supplied by Alumax Bath Enclosures, however caused, and whether
such claim is based upon warranty contract, negligence, strict liability, or any other theory, is limited
to repair or supply of such products, or repayment by Alumax Bath Enclosures of the purchase price
paid for it, at Alumax Bath Enclosures option.
Alumax Bath Enclosures does not make any other representations or warranties, express or implied,
including, but not limited to, any implied warranty of merchantability and any implied warranty of
fitness for a particular purpose. In no event shall Alumax Bath Enclosures be liable for special, direct,
indirect, or consequential damages, including, but not limited to, loss or use of profits.
Dealers agree to pass on to its customers and users in writing Alumax Bath Enclosure's Warranty and
Remedy as set forth above.
Laws and building and safety codes governing the design and use of bath enclosures vary widely.
Alumax Bath Enclosures does not control the selection of product configurations, operating hardware
or glazing materials, and assumes no responsibility therefor.
INSTALLATION NOTES
Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts using the
instruction sheets as a reference. Before discarding the carton, check for small hardware bags that
tend to fall to the bottom of the box. If any parts are damaged or missing, refer to the descriptions noted
in the instructions when contacting your dealer for replacements.
Handle glazed panels carefully. Tempered glass is difficult to break, but the sharp corners of the
panels can damage tile and floor coverings.
Please wear safety glasses whenever drilling or cutting.
To install your ALUMAX Shower Door you will need the following: tape measure, level, hacksaw, drill,
1/8" and 7/32" drill bits, #2 Phillips screwdriver, 3/16" wrench, sharp knife, and caulking (clear silicone
recommended). Optional tools include a center punch, files, a miter box for cutting parts to length and
masking tape for holding parts in place temporarily.