Alumax 650 - Manual (Page 8)

EPH-N00-06015
11-24-04
Page 8 of 8
13
Caulk both ends of the tub track [A] where
it meets the wall jambs [B] and the interior edge
of the wall jambs as shown. Run a bead of caulking
along the interior edge of the tub track.
NOTE: We recommend that you let the caulk cure
for 24 hours before using your new enclosure.
The Care and Cleaning of your new A LUMAX Bath Enclosure. The simplest
and preferred method of cleaning your unit is by washing it with clean water and
drying with a soft cloth. If soil is still present after drying, a non-abrasive cleanser
with a pH of seven to eight may be used. Comet Bathroom Cleaner
® has been
tested and is recommended by the Bath Enclosure Manufacturers Association
(BEMA). Do not use scouring pads, sharp instruments, or acid-based cleansers to
clean the unit.
Thank you for choosing an A LUMAX Bath Enclosure. Please take a moment
to complete and return the enclosed Customer Response Card. The information
you provide helps us improve the quality of our products and provide better service
to you, our customer.