beautypg.com

Alumax 650 User Manual

Page 2

background image

EPH-N00-06015

11-24-04

Page 2 of 8

LIMITED WARRANTY AND REMEDY

A

LUMAX

B

ATH

E

NCLOSURES

warrants to its dealers, customers, and all subsequent purchasers and users,

that the products supplied by it shall be free from material defects in material and workmanship for a period
of one (1) year after shipment, provided they are installed and maintained according to A

LUMAX

B

ATH

E

NCLOSURE

's recommended practices and installation instructions. This warranty shall apply only to

defects appearing within one (1) year from the date of shipment, and provided that A

LUMAX

B

ATH

E

NCLOSURES

is promptly notified in writing of such defects. The sole and exclusive remedy with respect

to the above warranty or with respect to any other claim relating to defects or any other condition or use
of the products supplied by A

LUMAX

B

ATH

E

NCLOSURES

, however caused, and whether such claim is based

upon warranty contract, negligence, strict liability, or any other theory, is limited to repair or supply of such
products, or repayment by A

LUMAX

B

ATH

E

NCLOSURES

of the purchase price paid for it, at A

LUMAX

B

ATH

E

NCLOSURE

's option.

A

LUMAX

B

ATH

E

NCLOSURES

does not make any other representations or warranties, express or

implied, including, but not limited to, any implied warranty of merchantability and any implied
warranty of fitness for a particular purpose. In no event shall A

LUMAX

B

ATH

E

NCLOSURES

be liable

for special, direct, indirect, or consequential damages, including, but not limited to, loss or use of
profits.

Dealers agree to pass on to its customers and users in writing A

LUMAX

B

ATH

E

NCLOSURE

's Warranty and

Remedy as set forth above.

Laws and building and safety codes governing the design and use of bath enclosures vary widely. A

LUMAX

B

ATH

E

NCLOSURES

does not control the selection of product configurations, operating hardware or glazing

materials, and assumes no responsibility therefor.

INSTALLATION NOTES

Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts using the
instruction sheets as a reference. Before discarding the carton, check for small hardware bags that tend
to fall to the bottom of the box. If any parts are damaged or missing, refer to the descriptions noted in
the instructions when contacting your dealer for replacements.

Handle glazed panels carefully and protect the edges. Safety tempered glass is very resistant to breakage,
but the sharp corners of the panels can damage tile and floor coverings.

Please wear safety glasses whenever drilling or cutting. When drilling holes in ceramic tile or marble, use
a center punch and hammer to carefully break the surface glaze so the drill can start without skidding.

To install your A

LUMAX

Bath Enclosure you will need the following: tape measure, level, #2 Phillips

screwdriver, flat screwdriver, drill, 1/8", 7/64" and 3/16" drill bits, hacksaw, pencil, and caulking (clear
silicone recommended). Optional tools include a miter box for cutting parts to length, files, center punch,
and masking tape.

NOTE: Before beginning installation, check the tub rim for level and both walls for plumb. If either are
off more than 1/4" to 3/8", you may want to contact your dealer for tapered fillers which can be used to
level the tub track or plumb the wall jambs.

This manual is related to the following products: