AItech ProA/V Media Extender - Wireless HDMI User Manual
Page 22
21
Note:
A.
If there is no signal quality shown, and the Source & Status LED is blinking in blue, the
transmitter is most likely out of range. You may have to verify the range and adjust shorten the
distance between the your HDTV set with the transmitter and the receiver. (The maximum
video transmission range is 66 feet in line of sight (LOS) scenarios.) < The minimum range is 6.5
feet. >
B.
If the connection or link is lost, it may be caused by the following reasons:
a.
The range is over the maximum transmission distance.
b.
Either the transmitter or the receiver has been switched off.
C.
If the SOURCE LED continues to blink in blue (slower than “no signal mode”) and there is no
video displayed or the video quality suffers, this is an indication that the video frame rate from
the source device is not supported, or the transmission is out of range.