Clarion TB743W - Manual (Page 16)

English
Owner
’s manual
16
TB741P/TB742P/TB743W
ADJ 2
VTR N/P
[ TV AREA ]
[ AUDIO OUT ]
NTSC AUTO PAL
TV1 TV2 VTR1 VTR2
TV Mode Operations
[ TV AREA ]
[ VTR N/P ]
AUDIO OUT HI LOW
ADJ 2
Selecting VTR system (NTSC/PAL/
AUTO)
1. Display the adjustment menu as described
in the section, “Selecting the adjustment
menu”.
2. Press the [ a] or [d] button to select
NTSC, PAL or AUTO.
∗ When [AUTO] is selected, automatic
switching between NTSC and PAL may not
occur properly. In such cases, use manual
selection.
∗ Press the [ADJ] button to return to the normal
screen mode.
∗ The factory default setting is “AUTO”.
Setting the audio output sound
level
You can adjust an output sound level of audio
output terminal (RCA L/R).
1. Display the adjustment menu as described
in the section, “Selectiong the adjustment
menu”.
2. Press the [ a] or [d] button to select a
desired mode and set it.
3. Press the [ADJ] button to return to the
normal screen mode.
∗ The factory default setting is “HI”.
Changing the TV reception area
(TB741P only)
∗ The factory default setting is “OTHERS”.
1. Display the adjustment menu as described
in the section, “Selecting the adjustment
menu”.
TV AREA
■ OTHERS ■
[ NEW ZELAND ]
[ AUSTRALIA ]
RTN
2. Press the [ d] button to display a TV area
selecting screen.
3. Press the [ w] or [z] button to select a
desired mode and set it.
∗ Press the [BND] button when all adjustments
have been made to return to the adjustment
menu screen.
Press the [ADJ] button to return to the normal
screen mode.
∗ Any station preset memories are lost when
the reception area is changed.
Watching a external device
Refer to the Instruction Manual of the unit
concerned for details on operating the external
device connected.
Press the [BND] button to select VTR (External
Device).
Each time the [BND] button is pressed, the
setting is switched in the sequence shown
below.