CyberData 930095K - Manual (Page 20)

CyberData Corporation 930095K Operations Guide
Installing the VoIP Ceiling Speaker
Configure the Speaker Parameters
14
2.3.3 Set up the Speaker
1. Click the Speaker Setup button to open the Speaker Setup page. See Figure 2-8 .
Figure 2-8. Speaker Setup
2. On the Speaker Setup page, enter values for the parameters indicated in Table 2-6 .
Table 2-6. Speaker Setup Parameters
Web Page Item Description
Device Name Enter a descriptive name for this device (if desired).
Select Speaker Function Select SIP or MGROUPS.
Change Web Access Username Use this field to change the Web Access Username
Change Web Access Password Use this field to change the Web Access Password
Re-enter New Password Use this field to re-enter a new password
Speaker Tone Before Paging Enable/Disable the speaker tone (beep) before each page.
Speaker Tone After Initialization Enable/Disable the speaker tone (beep) after the system
startup.