LG GR-K09S - Manual (Page 10)

lili
Installation method
^ Ground properly during installation.
It can cause
electrical shock in
case of a problem
or leakage.
^ Do not install the product under
direct sunlight or hang floor cloth
on the handle.
It can change the
color of the
refrigerator.
» Install the product where it is not
too hot or cold.
Install the product where the
surrounding temperature is
between 5°C and 43°C. If the
temperature is too high or low, it
can cause problems to the
functions of the product. Do not
install any heating device on the
top plate of the refrigerator.
It can cause an explosion or a fire.
iOc Щ ШЁШ 1
[fl
a *
Ъ III
И
• Maintain a suitable clearance
around the appliance.
Maintain suitable clearance around
the appliance as shown in the
figure. If there is
insufficient clearance,
the appliance
performance
deteriorates and
the electricity cost will increase.
^ Hang the power cord on the back
of the refrigerator to keep it fixed
and then plug the power.
When the power cord
is pressed under
the refrigerator, it
can cause a fire.
' More II
than 5cm.
^ Install the appliance on a firm and
level floor.
If the floor is unstable, the
vibration may cause noise and
functional failure.
• If the appliance is not leveled,
use the horizontal adjusting leg
to level the product.
• When install the appliance on a
carpeted floor or on the wooden
floor, place a piece of plywood
or similar material underneath to
prevent the discoloration.
10