LG LW1010ER - Manual (Page 18)

Operating Instructions
Remote Controller
CAUTION: The Remote Controller will not function properly If strong
light strikes the sensor window of the air conditioner or if there are
obstacles between the Remote Controller and the air conditioner.
Power----------------------------------------------------------------------------------------------
Operation starts when this button is pressed and
stops when you press the button again.
Temperature Control---------------------------------
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60°F~86T
(16'C~30'C).
The unit takes an average of 30 minutes to adjust the
room temperature by 1°F.
Fan Speed-----------------------------------------------
For increased power while cooling, select a higher
fan speed.
3 steps: High-Low-Med
On/Off Timer------------------------------------------
The timer can be set to start and stop the unit in
hourly increments (up to 12 hours).
You will usually use shut-off time while you sleep.
For your sleeping comfort, once timer is set,
the temperature setting will raige 2°F after 30min
and once again after another 30min.
Operation Mode Selector-
Select cooling mode to cool the room.
Select energy saver mode for energy saving
operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
How to Insert Batteries
1. Remove the cover from the back of the remote
controller
2. Insert two batteries.
Be sure of the polarity when installing the
batteries.
Be sure that both batteries are new.
3. Re-attach the cover.
Do not use rechargeable
batteries. Such batteries
differ from standard dry cells
in shape, dimensions, and
performance.
Remove the batteries from
the remote controller if the air
conditioner is not going to be
used for an extended length
of time.
18 Room Air Conditioner