LG LW1010ER User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
6J
The cabinet should be installed with a very slight tilt
(about 1/2") downward toward the outside
Adjust the bolt and the nut of Sill Support (g) for
balancing the cabinet.
7)
Attach the cabinet to the window stool by driving
the screws ® (Type B: Length 16mm (5/8 inch)
and below.) through the front angle Into window
stool.
.
8
)
Pull each Frame Curtain ® fully to each window
sash track, and repeat step 2.
Screw(Type B)®
^ Attach each Frame Curtain® the window sash using
screws ©(Type C).
CAUTION: Do not drill a hole in the bottom
pan. The unit is designed to operate with
approximately 1/2" of water in bottom pan.
There is no need to add water if the pan is
dry.
1^
Slide the unit Into the cabinet.
CAUTION: For security
screws (Type A) at cabinet's sides.
A
CAUTION: For security purpose, reinstall
1J)
Cut the Foam-Strip ® to the proper length and insert
between the upper window sash and the lower
window sash.
Foam-Strip®
Owner's Manual 15