Crown Equipment 4000 Series - Manual (Page 16)

Know the Hazards
Capacity & Load Center
11 Capacity & Load Center Capacity & Load Center 12
Load
Center
Center of evenly
distributed load
24" Max
(600mm)
5230(206) 1745(3850) 600(24)
1450(3200)
1385(3050)
1815(4000)
750(30)
750(30)
600(24) 4775(188)
5230(206)
4775(188)
Units of measure, kg/mm(lb/in)
4685(10324)
Attachment Data Sideshifter
Truck Type E Serial Number A1234567
000 CL
600(24)
A B
Center
Load
FC
S E R I E S
B A Capacity with Mast Vertical
Truck Wt. as equip., with max. batt.
SAMPLE
WHEN YOU INSTALL OR CHANGE A BATTERY
• Turn the truck
OFF
and check that all controls are in
neutral. Disconnect the battery. Tilt the steering wheel
up and raise the battery cover. Remove the full side
cover or short battery retainer.
• Make certain you use the correct size and weight
battery. Never operate a truck that has an underweight
or undersized battery installed.
• If you use a roller stand to install or remove a battery,
make sure the roller stand is the same height as the
rollers in your truck's battery compartment. Also make
sure the roller stand is at least as long as the battery.
• Never let anything metal touch the top of the cells.
You could cause sparks or do damage to the battery.
Use an insulator (such as plywood) when necessary.
• Use an approved spreader bar to move a battery to, or
from, the battery compartment or stand. Make sure
you adjust the spreader bar hooks to fit the battery.
AFTER INSTALLING YOUR BATTERY
• Replace the full side cover or short battery retainer.
• Lower and latch the battery cover.
• Connect the battery.
• Return the steering wheel to a comfortable position.
Turn the truck
ON
and check truck operation.
Know the Hazards
SAMPLE CAPACITY PLATE
The information shown
on this sample plate does not
apply to your truck.
Capacity & Load Center 12
Truck Type
Truck Weight as equipped, with max. battery
4685(10324)
Attachment Data
Sideshifter-100(4)
Serial Number
12345678 E 251 A
5230(206) 1745(3850) 600(24)
1450(3200)
1385(3050)
1815(4000)
750(30)
750(30)
600(24) 4775(188)
5230(206)
4775(188)
4000
600(24) Capacity W/Mast Vertical
FC
QUICK LOCATORS
In addition to the "Contents"
page you can use page
headings to find topics. Some
pages also have a picture of the
truck in the corner showing
features or functions covered
on that page.
"KNOW THE HAZARDS"
Watch for and read these
special blocks. You will find
information about possible
safety hazards and how to avoid
them.
HOW-TO-DRAWINGS
On many pages you will find pictures as
well as text to help you understand how
to use your truck safely and productively.
WHAT'S IN IT FOR YOU?
The better you understand your truck and how to use it, the
better and safer operator you can be. Here are some guides
to using this manual.
Know the
Capacity & Load Center
11 Capacity & Load Center Capacity & Load Center 12
Load
Center
Center of evenly
distributed load
24" Max
(600mm)
5230(206) 1745(3850) 600(24)
1450(3200)
1385(3050)
1815(4000)
750(30)
750(30)
600(24) 4775(188)
5230(206)
4775(188)
Units of measure, kg/mm(lb/in)
4685(10324)
Attachment Data
Sideshifter
Truck Type E Serial Number A1234567
000 CL
600(24)
A B
Center
Load
FC
S E R I E S
B A Capacity with Mast Vertical
Truck Wt. as equip., with max. batt.
SAMPLE
Battery Maintenance
29 Battery Maintenance What's in it for You? 6
What's in it for You?
WHEN YOU INSTALL OR CHANGE A BATTERY
• Turn the truck OFF and check that all controls are in
neutral. Disconnect the battery. Tilt the steering wheel
up and raise the battery cover. Remove the side cover
or battery retainer.
• Make certain you use the correct size and weight
battery. Never operate a truck that has an underweight
or undersized battery installed.
• If you use a roller stand to install or
remove a battery, make sure
the roller stand is the same height as the
rollers in your truck's battery compartment. Also make
sure the roller stand is at least as long as the battery.
• Never let anything metal touch the top of the cells. You
could cause sparks or do damage to the battery. Use an
insulator (such as plywood) when necessary.
• Use an approved spreader bar to move a battery to, or
from, the battery compartment or stand. Make sure you
adjust the spreader bar hooks to fit the battery.
AFTER INSTALLING YOUR BATTERY
• Replace the battery retainer or side cover.
• Lower and latch the battery cover.
• Connect the battery.
• Return the steering wheel to a comfortable position.
Turn the truck ON and check truck operation.
ART IN
PROGRESS
Know the Hazards
SAMPLE CAPACITY PLATE
The information shown on this
sample plate does not apply to
your truck.
Capacity & Load Center 12
Truck Type
Truck Weight as equipped, with max. battery
4685(10324)
Attachment Data
Sideshifter-100(4)
Serial Number
12345678 E 251 A
5230(206) 1745(3850) 600(24)
1450(3200)
1385(3050)
1815(4000)
750(30)
750(30)
600(24) 4775(188)
5230(206)
4775(188)
4000
600(24) Capacity W/Mast Vertical
FC
QUICK LOCATORS
In addition to the "Contents"
page you can use page
headings to find topics. Some
pages also have a picture of the
truck in the corner showing
features or functions covered
on that page.
"KNOW THE HAZARDS"
Watch for and read these special blocks.
You will find information about possible
safety hazards and how to avoid them.
HOW-TO-DRAWINGS
On many pages you will find pictures as
well as text to help you understand how
to use your truck safely and productively.
WHAT'S IN IT FOR YOU?
The better you understand your
truck and how to use it, the
better and safer operator you
can be. Here are some guides
to using this manual.
Know the Hazards
Capacity & Load Center
11 Capacity & Load Center Capacity & Load Center 12
Load
Center
Center of evenly
distributed load
24" Max
(600mm)
5230(206) 1745(3850) 600(24)
1450(3200)
1385(3050)
1815(4000)
750(30)
750(30)
600(24) 4775(188)
5230(206)
4775(188)
Units of measure, kg/mm(lb/in)
4685(10324)
Attachment Data Sideshifter
Truck Type E Serial Number A1234567
000 CL
600(24)
A B
Center
Load
FC
S E R I E S
B A Capacity with Mast Vertical
Truck Wt. as equip., with max. batt.
SAMPLE
Battery Maintenance What's in it for You?
WHEN YOU INSTALL OR
CHANGE A BATTERY
• Turn the truck OFF and check
that all controls are in
neutral. Disconnect the battery. Tilt the
steering wheel up and raise the battery cover.
Remove the side cover or battery retainer.
• Make certain you use the correct size and weight
battery. Never operate a truck that has an underweight
or undersized battery installed.
• If you use a roller stand to install or remove a battery,
make sure the roller stand is the same height as the
rollers in your truck's battery compartment. Also make
sure the roller stand is at least as long as the battery.
• Never let anything metal touch the top of the cells. You
could cause sparks or do damage to the battery. Use an
insulator (such as plywood) when necessary.
• Use an approved spreader bar to move a battery to, or
from, the battery compartment or stand. Make sure you
adjust the spreader bar hooks to fit the battery.
AFTER INSTALLING YOUR BATTERY
• Replace the battery retainer or side cover.
• Lower and latch the battery cover.
• Connect the battery.
• Return the steering wheel to a comfortable position.
Turn the truck ON and check truck operation.
ART IN
PROGRESS
SAMPLE
Know the Hazards
SAMPLE CAPACITY PLATE
The information shown on this
sample plate does not apply to
your truck. SAMPLE SAMPLE
Truck Type
Truck Weight as equipped, with max. battery
4685(10324)
Attachment Data
Sideshifter-100(4)
Serial Number
12345678 E 251 A
Units of measure, kg/mm(lb/in)
5230(206) 1745(3850) 600(24)
1450(3200)
1385(3050)
1815(4000)
750(30)
750(30)
600(24) 4775(188)
5230(206)
4775(188)
4000
600(24)
A
B
Center
Load
Capacity W/Mast Vertical A B
FC
QUICK LOCATORS
In addition to the "Contents" page you can
use page headings to find topics. Some
pages also have a picture of the truck in
the corner showing features or functions
covered on that page.
"KNOW THE HAZARDS"
Watch for and read these special blocks.
You will find information about possible
safety hazards and how to avoid them.
HOW-TO-DRAWINGS
On many pages you will find pictures as
well as text to help you understand how
to use your truck safely and productively.
WHAT'S IN IT FOR YOU?
The better you understand your
truck and how to use it, the better and safer operator you
can be. Here are some guides to using this manual.
Know the Hazards
Capacity & Load Center
Load
Center
Center of evenly
distributed load
24" Max
(600mm)
5230(206) 1745(3850) 600(24)
1450(3200)
1385(3050)
1815(4000)
750(30)
750(30)
600(24) 4775(188)
5230(206)
4775(188)
Units of measure, kg/mm(lb/in)
4685(10324)
Attachment Data Sideshifter
Truck Type E Serial Number A1234567
000 CL
600(24)
A B
Center
Load
FC
S E R I E S
B A Capacity with Mast Vertical
Truck Wt. as equip., with max. batt.
SAMPLE
Battery Maintenance What's in
WHEN YOU INSTALL OR CHANGE A BATTERY
• Turn the truck OFF and check that all controls are in
neutral. Disconnect the battery. Tilt the steering wheel
up and raise the battery cover. Remove the side cover
or battery retainer.
• Make certain you use the correct size and weight
battery. Never operate a truck that has an underweight
or undersized battery installed.
• If you use a roller stand to install or remove a battery,
make sure the roller stand is the same height as the
rollers in your truck's battery compartment. Also make
sure the roller stand is at least as long as the battery.
• Never let anything metal touch the top of the cells. You
could cause sparks or do damage to the battery. Use an
insulator (such as plywood) when necessary.
• Use an approved spreader bar to move a battery to, or
from, the battery compartment or stand. Make sure you
adjust the spreader bar hooks to fit the battery.
ART IN
PROGRESS
Know the Hazards
BATTERY RETAINER MUST BE IN PLACE
The battery could slide out if the retainer is not in place.
Check that the retainer is installed and secure, and battery
cover is latched.
BATTERY SIZE AND WEIGHT IS IMPORTANT
Make certain you use the correct size and weight battery.
Never operate a truck that has an underweight or
undersized battery installed.
TRUCK BATTERIES CAN BE DANGEROUS
Your truck battery produces gas that can explode.
It also contains acid that could burn or disfigure you.
• Do not try to install, remove, charge or service your
truck battery unless you are trained and authorized.
• Never smoke or use an open flame around batteries.
• Your company should provide an area where it is safe
to work on batteries. Use that area for all battery work.
• Use protective equipment such as gloves, eye shields,
aprons etc. when working on batteries.
BEFORE CHARGING YOUR TRUCK BATTERY
• See that the battery cells are filled to the proper level.
Never use an open flame to check the batteries.
• Check that the charger is the same voltage and
amperage as the battery. Read the battery charger
instructions.
• Be sure the charger is turned
OFF
before connecting
the battery to the charger. Otherwise a spark could
cause the battery to explode. Also, make sure the
truck key switch is turned
OFF
and all controls are in
neutral.
Batteries produce explosive gas.
Do not smoke, use open flame, or
create an arc or sparks near this
battery. Ventilate well in enclosed
areas and when charging.
Batteries contain Sulfuric Acid which
causes severe burns. Do not get in
eyes, on skin, or clothing. In case of
contact, flush immediately. Get medical
attention if your eyes are affected.
Minimum battery size allowed
Undersize battery can affect truck
handling and stability. You could have
an accident.
Use U.L. classified Type EO battery.
Battery Maintenance
Battery Maintenance 30 29 Battery Maintenance
WARNING
DANGER