Crown Equipment 4000 Series - Manual (Page 10)

Know the Hazards
Power On & Off
KEY SWITCH
• Turn the key clockwise to
TEST
(yellow dot).
Check that seat alarm and all indicator lights are working.
• If an alarm does not turn off after the test period, report
the problem to your supervisor.
• Let go of the key and it will return to
ON
(green dot).
• Turn the key counterclockwise (red dot) to shut the
truck off. Always turn the key to
OFF
when leaving the
truck.
POWER DISCONNECT
Pull the Power Disconnect handle up to disconnect the
battery and cut power to the truck.
Always use the Power Disconnect if the truck isn't working
right. Don't use the truck, and report the problem to
your supervisor immediately.
Push the Power Disconnect handle down, and turn the
key switch to
OFF
and back to
TEST
, to reconnect the
battery.
17 Power On & Off Raise/Lower, Tilt & Accessories 18
Raise/Lower, Tilt & Accessories
Raise/Lower lever
Tilt lever
Accessory levers (optional)
For example: Pull the Raise/Lower lever toward
you to raise the forks, as shown by the symbol.
Push the lever away from you to lower the forks.
HYDRAULIC OPERATIONS CAN AFFECT STABILITY
Capacities shown on your capacity plate are for loads
that are centered and level. Be extra careful when tilting
a load. (This also applies to accessories or attachments
your truck may have, such as sideshift, carton clamp,
push-pull, etc.)
Note: The left side of each lever has a different shape, to
help you identify them by feel.
HYDRAULIC LEVER OPERATION
Pull a lever toward you, away from the mast, and you'll
get the action shown by the symbol in the top of the
lever. Push the lever away from you, toward the mast,
and you'll get the opposite action.
The farther you move the lever from neutral, the faster
the action will be.