LG WT1201CW - Manual (Page 35)

SPECIFICATIONS/USING SMARTDIAGNOSIS~ 35
SPECIFICATIONS
Model WT1201C*, WT1101C*
Description Top-Loading Washer
Electrical requirements 120 VAC @60 Hz.
Max. water pressure 14.5-116 PSI (100-800 kPa)
Dimensions 27"(W) X 28 3/g"(D) X 40 3/i6"(H), 55 2/4"(H with lid open)
68.6 cm (W) X 72.1 cm (D) X 102 cm (H), 141 cm (H with lid open)
Net weight 134 lbs. (61 kg)(WTl10lC* 132 lbs. (60 kg)]
Max. spin speed 1,100 RPM
USING SMARTDIAGNOSIS TM
- Only use this feature when instructed to do so by the call center. The transmission sounds similar to a fax machine, and so has
no meaning except to the call center.
- SMARTDIAGNOSIS^" cannot be activated if the washer does not power up. If this happens, then troubleshooting must be done
without SMARTDIAGNOSIS™.
If you experience problems with your washer, call 1-800-243-0000 (1-888-542-2623 in Canada). Follow the call center agent's
instructions, and perform the following steps when requested:
1. Press the
(CD)
2. When instructed to do so by the call center, place the mouthpiece of your phone very close to the POWER button.
POWER
autooff
to turn on the washer. Do not press any other buttons.
( TT^ 1
3. Press and hold
' y
for three seconds, while holding the phone mouthpiece to the icon or POWER button.
4. Keep the phone in place until the tone transmission has finished. This takes about 6 seconds, and the display will count down
the time.
• For best results, do not move the phone while the tones are being transmitted and do not touch the console with the phone.
• If the call center agent is not able to get an accurate recording of the data, you may be asked to try again.
• Pressing the POWER button during the transmission will shut off the SMARTDIAGNOSIS™.
5. Once the countdown is over and the tones have stopped, resume your conversation with the call center agent, who will then be
able to assist you in using the information transmitted for analysis at the call center.
"SMARTDIAGNOSIS™ is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting through
service calls. The effectiveness of this feature depends upon various factors, including, but not limited to, the reception of the
cellular phone being used for transmission, any external noise that may be present during the transmission, and the acoustics of
the room where the machine is located. Accordingly, LG does not guarantee that SMARTDIAGNOSIS™ would accurately troubleshoot
any given issue."