Connecting the drain line – LG WT1201CW User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION INSTRUCTIONS 15
Connecting the drain line
Secure the drain hose to the drain to prevent moving and
leaking.
rO
NOTE----------------------------------------
The drain hose should be properly secured. Failure to
properly secure the drain hose can result in flooding
and malfunction.
Total height of the hose end should not exceed 96
inches (243.8 cm) from the bottom of the washer.
The drain must be installed in accordance with any
applicable local codes and regulations.
Make sure that drain hose is not stretched, pinched,
crushed, or kinked.
Using a laundry tub
Using a standpipe
1 Insert the end of the drain hose into the standpipe.
Bend the end of the drain hose to the desired shape and
support it on the edge of the laundry tub. Use a tie strap to
secure the drain hose in place.
2 Use a tie strap to secure the drain hose in place.
k
39”
(99 cm)
t
Cable Tie
Cable Tie