Notes – Canon 244 T User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

6. Set the main switch to OFF when

flash photography is finished.

Notes

1. if the subject is too far from the

flash, the green "P" will blink rapid

ly (8 times per sec) to warn you.
(The "t" remains solid.) Move

closer to the subject until the "P"
stops blinking Once you have
found a suitable shooting position,

be sure to remove your finger from

the shutter button* and re-focus
the subject. Then you can take the

picture.

* If you do not remove your

finger from the shutter button

after changing your position,
exposure will be incorrect,
since exposure is set each

time the shutter button is

pressed halfway.