Clarion pro audio vrx 630 - Manual (Page 31)

VRX630
35
English
Owner
’s manual
6. Operate the JOYSTICK ¡ rightward or left-
ward in the BASIC/USER pattern selection/
memory display to select USER memory P1
to P6 to be stored, and press the ENT at the
center of the JOYSTICK
¡ for 2 seconds or
longer to store the adjusted G.EQ pattern to
the USER memory.
∗
By pressing the preset button # 1 to 6 for 2
seconds or longer in the G.EQ adjusting dis-
play, the G.EQ pattern can be stored in the
USER memory.
7. To set a title of the stored USER pattern, op-
erate the JOYSTICK ¡ rightward or leftward
to select “TITLE” and press the ENT at the
center of the JOYSTICK
¡ to change into
the Title Input display.
∗
For title inputting method, refer to the section
“Entering titles”.
8. Operate the JOYSTICK ¡ rightward or left-
ward to select “MENU” and press the ENT at
the center of the JOYSTICK
¡ to change
into the AUDIO-MODE display.
Standard mode/DSF
operations
DSF effect ON/OFF
∗
The factory default setting is “ON”.
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “DSF ON/OFF”. “ON” and
“OFF” items are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward and left-
ward to select “ON” or “OFF” and press the
ENT at the center of the JOYSTICK
¡ to set
it.
Note:
• If the DSF effect is set to OFF, the adjustment made
in “DSF operations” is not reflected in the music
source.
Calling DSF BASIC Pattern/USER
Pattern
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “DSF MODE”. “BASIC 1”, “BA-
SIC 2” and “USER” items are displayed in the
menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select the item thus called, and press
the ENT at the center of the JOYSTICK
¡ to
show BASIC pattern selecting display or
USER pattern selection/memory display.
4. In the pattern selecting display, operate the
JOYSTICK ¡ rightward or leftward to select
P1 to P6, and press the ENT at the center of
the JOYSTICK
¡ to call corresponding DSF
mode. In this display, pressing the No. button
in correspondence to the preset buttons
#
can also call the DSF mode.
∗
After selecting P1 to P6 by operating the JOY-
STICK
¡ , press the ENT at the center of the
JOYSTICK ¡ for 2 seconds or longer to copy
the selected pattern to the USER pattern.
∗
Operate the JOYSTICK ¡ rightward or left-
ward to select “EDIT”, and press the ENT at
the center of the JOYSTICK
¡ to show DSF
adjusting display, in which the properties of
currently selected pattern can be adjusted.
7. To set a title of the stored USER pattern, op-
erate the JOYSTICK ¡ rightward or leftward
to select “TITLE” and press the ENT at the
center of the JOYSTICK
¡ to change into
the Title Input display.
∗
For title inputting method, refer to the section
“Entering titles”.
8. Operate the JOYSTICK ¡ rightward or left-
ward to select “MENU” and press the ENT at
the center of the JOYSTICK
¡ to change
into the AUDIO-MODE display.
Professional mode/VSE
operations
Note:
• The adjustment made in professional mode is not
reflected in the adjustment in standard mode. On
the contrary, the adjustment made in standard mode
is not reflected in the adjustment in professional
mode.
VSE effect ON/OFF
∗
The factory default setting is “ON”.
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “VSE ON/OFF”. “ON” and
“OFF” items are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select “ON” or “OFF” and press the ENT
at the center of the JOYSTICK
¡ to set it.
DSP operations