Radio operations, 17 english, Turning on/off the loudness – Clarion pro audio vrx 630 User Manual

Page 13: Basic operations, Fm reception, Changing the reception area, Listening to the radio, Tuning, Seek tuning

VRX630

English

Owner

’s manual

Turning on/off the loudness

The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.

∗

This function is enabled only when the panel is
open.

1. Press the A-M button

for 1 second or longer

to select Loudness ON. The “LD” indicator
lights in the display.

2. Press the A-M button

for 1 second or longer

to select Loudness OFF. The “LD” indicator
goes off.

Note:
• When using a sold separately digital sound proces-

sor (DPH910), a feature called auto loudness is
selected. This function is different from the loud-
ness effect. For further details on the auto loudness
feature, refer to the subsection “Output adjustment
of auto loudness, subwoofer and playback
band”.

Basic Operations

Radio Operations

FM reception

For enhanced FM performance the

tuner includes signal actuated stereo control, En-
hanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.

Changing the reception area

This unit is initially set to USA frequency inter-
vals of 10kHz for AM and 200kHz for FM. When
using it outside the USA, the frequency recep-
tion range can be switched to the intervals be-
low.

●

Setting the reception area

While pressing DISP button

, each time you

press and hold the number “6” of the PRE-
SET buttons

for 2 seconds or longer, the

reception area switches from inside the USA
to outside the USA or from outside the USA
to inside the USA.

∗

Any station preset memories are lost when the

reception area is changed.

Listening to the radio

1. Press the FNC button

and select the RA-

DIO mode.

2. Press the BND button

and select the radio

band. Each time the button is pressed, the
radio reception band changes in the following
order:

FM1

➜

FM2

➜

FM3

➜

FM1...

3. Press the right or left side of the SEARCH

button

to tune in the desired station.

Tuning

There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.

Seek tuning

1. Press the BND button

and select the de-

sired band. (FM or AM)

∗

If “MANU” is lit in the display (or when the
panel is closed, if the indicator “SRCH” is not
lit) press and hold the BND button

for 1

second or longer. “MANU” in the display goes
off (or when the panel is open the indicator
“SRCH” lights)and seek tuning is now avail-
able.