Features, Upside down view of router – Craftsman 315.175130 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FEATURES
KNOW YOUR ROUTER
See Figure 1.
Before attempting to use any tool, familiarize yourself
with all operating features and safety requirements.
SWITCH
To turn your router on, depress the switch trigger.
Release switch trigger to turn your router off.
LOCK-ON BUTTON
The switch of your router is equipped with a lock-on
feature which is convenient when operating for
extended periods of lime. To lock on, depress the
trigger, push in the lock button located on the side of
the handle, then while holding the lock button pushed
in, release the trigger. To release the lock, depress
the trigger and release.
CHIP SHIELD
A clear plastic chip shield is installed on the front of
your router for protection against flying dust and
chips. The shield i^designed to fit the front opening of
the router base. If necessary to remove chip shield.
squeeze the tabs on each end and pull outward. To
replace, squeeze the tabs at each end, fit into
opening, then release.
For your protection, do not
use router without chip shield properly in place.
WRENCH STORAGE AREA
Your router has a wrench storage area located on the
top end cap portion of the motor housing. When
installing or removing cutters, remove the wrench
from its storage area. Proper storage of wrench when
not in use will help reduce the possibility of losing
wrench.
ELECTRICAL CONNECTION
Your router has a precision built electric motor. It
should be connected to a
power supply that is 120
volts, 60 Hz, AC only (normal household current).
Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power
and the motor will overheat. If your router does not
operate when plugged into an outlet, double-check
the power suppiy.
UPSIDE DOWN VIEW OF ROUTER
DEPTH
INDICATOR
RING
INDICATOR
POINT
WRENCH
STORAGE
AREA
SPINDLE
LOCK
DEPTH
ADJUSTING
RING
COLLET NUT
CHIP SHIELD
INDICATOR
POINT
SUBBASE
HANDLE
Fig. 1
WARNING:
Do not allow familiarity with your router to make you careless. Remember that a careless fraction
of a second is sufficient to inflict severe injury.