Product specifications, Unpacking, Accessories – Craftsman 315.175130 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WARNING;
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicais known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
PRODUCT SPECIFICATIONS
Depth of cut
Collet
Horsepower
Rating
0 - 1 - 1 / 2 in.
1/4 in.
1
-
1/2
120 volts, 60 Hz, AC only
Amperes '
No load speed
Power cord
Net weight
8
25,000 RPM
10 ft.
8.13 lbs.
UNPACKING
Your router has been shipped completely assembled.
Inspect it carefully to №ake sure no breakage or
damage has occurred during shipping. If any parts are
damaged or missing, contact your nearest Sears
Retail Store to obtain replacement parts before
attempting to operate router. A wrench and this
Owner's Manual are also included.
WARNING:
If any parts are missing, do not
operate this toot until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
ACCESSORIES
THE FOLLOWING RECOMMENDED ACCESSORIES ARE
CURRENTLY AVAILABLE AT SEARS RETAIL STORES.
Template Guide Bushing
m
COMBI
NATION
PANEL
CUTTER
IP
VEINING
BIT
1
CORE BOX
BIT
4
V-GROOVE
CHAMFER
STRAIGHT
FACE
BIT
Ü
COMB
INATION
STRAIGHT,
BEVEL
CUTTER
HINGE
MORTISING
BIT
DOVETAIL RABBET
CUHER
BIT
BITS
CD
1
I "CARBIDE TIPPED BITS j
OGEE,
ROMAN 0
COVE
BIT,
r , 4 5 °
CHAMFER
BIT
□D
BEAD
QUARTER-
ROUND
BITS
SP
ARBOR
2589
WITH2
BALL
BEARINGS
(1/2 IN. &
5/8 IN.)
•25895
*25895 FOR CARBIDE TIPPED EDGE FORMING BITS
2589 FOR HIGH SPEED STEEL EDGE FORMING BITS
^ WARNING:
The use of attachments or accessories not listed above might be hazardous.