Product specifications, Unpacking, Accessories – Craftsman 315.275000 User Manual
Page 5: Combi, Nation, Panel, Cuher, Veining, 25895 for carbide tipped edge forming bits, 2589 for high speed steel edge forming bits
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRODUCT SPECIFICATIONS
Depth of cut
Collet
Also included with packaging
Horsepower
0
-
1
-
1/2
in.
1/2
in.
1/4 in.
2
Rating
Amperes
No load speed
Net weight
120 volts, 60 Hz, AC only
9
25,000 RPM
7.8 lbs.
UNPACKING
Your router has been shipped completely assembled.
Inspect it carefully to make sure no breakage or
damage has occurred during shipping. If any parts are
damaged or missing, contact your nearest Sears
Retail Store to obtain replacement parts before
attempting to operate router. A 1/4 in. collet assembly,
7/8 in. wrench, and Owner's Manual are included in
the box.
WARNING: If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
ACCESSORIES
THE FOLLOWING RECOMMENDED ACCESSORIES ARE
CURRENTLY AVAILABLE AT SEARS RETAIL STORES.
Template Guide Bushing
COMBI
NATION
PANEL
CUHER
VEINING
BIT
I
CORE BOX
BIT
V-GROOVE
CHAMFER
STRAIGHT
COMB-
HINGE
DOVETAILRABBET OGEE,
COVE
BEAD
FACE
INATION MORTISING CUHER
BIT
ROMAN 0
BIT,
QUARTER-
BIT
STRAIGHT,
BIT
BITS
45°
ROUND
BEVEL
CHAMFER
BITS
CUHER
BIT
1
CD
Í
CD
LJ
i)
111
A
1 *CARBIDE TIPPED BITS |
ARBOR
2589
WITH 2
BALL
BEARINGS
(1/2 IN. &
5/8 IN.)
*25895
*25895 FOR CARBIDE TIPPED EDGE FORMING BITS
2589 FOR HIGH SPEED STEEL EDGE FORMING BITS
A WARNING: The use of attachments or accessories not listed above might be hazardous.