Craftsman 646.10620 - Manual (Page 5)

MAINTENANCE
• Terrycloth bonnets are 100% cotton and
can be machine-washed in cold water
with a small amount of detergent, then
machine-dried at low heat. However,
hand-washing and air drying is recom­
mended for longer terrycloth bonnet life.
• Wax applicator bonnets are to be used
only once, then thrown away.
• To prolong pad life and shape, always
store polisher with pad face up.
• Remove bonnet from pad when polisher
is not in use so that pad can dry out and
retain its original shape.
• DO NOT USE ABRASIVE
COMPOUNDS.
’ The most common error is applying too
much wax. If pad becomes saturated, it
will not last as long, and polishing will
be more difficult and take longer.
If applicator bonnet continually comes off
pad, you may be using too much wax.
If buffing seems difficult, you may have
used too much wax.
Use only mild soap and a damp sponge
to clean polisher. Do not immerse any
part in liquid. If polisher needs repair,
use only identical replacement parts
illustrated and listed on Page 6.
The polishing bonnet is only to be used
for the final buff. Do not use it to apply
or remove wax.
Polishing bonnets can be cleaned by
hand washing in lukewarm water and
mild detergent; then machine dry at the
lowest setting.
TO REPLACE PAD ASSEMBLY
1 .
2 .
3.
Insert screwdriver through aperture
between polisher and pad. and brace
against countenveight.
Remove center bolt with 1/2" deep well
socket wrench, turning clockwise.
Replace pad assembly and turn bolt
counterclockwise.
FULL ONE YEAR WARRANTY
If this product fails due to a defect in material or workmanship within one year from the date of
purchase. Sears will at its option repair or replace it free of charge.
Return this pr^uct to a Sears Service Center for repair, or to place of purchase for
expandable Items end are not
I ' t e T ^ r c h a s e " “ ' ' “ e ^ n t y applies lor only 90 days from the
irom S t o ' s S i r x a r y
Sears Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179