Tool use and care, Service, Accessories – Craftsman 646.10620 User Manual
Page 3: Carton contents, Operation, B for paste wax
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOOL USE AND CARE
• Store idle tools out of reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained
users.
• Maintain tools with care. Properly
maintained tools are less likely to bind
and are easier to control.
• Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
tool’s operation. If damaged, have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
• Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one tool may create a risk of
injury when used on another toot.
SERVICE
• Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel may result in a risk of injury.
• When servicing a tool, use only identical
replacement parts. Follow instructions in
the maintenance section of this manual.
Use of unauthorized parts or failure to
follow maintenance instructions may
create a risk of electric shock or injury.
ACCESSORIES
CARTON CONTENTS
• Storage Case
• Buffer/Polisher
• Terrycloth Bonnets (3)
• Wax Applicator Bonnets (5)
AVAILABLE ACCESSORIES
Item
Stock#
Polishinq bonnet (1)
10604
Terrycloth bonnets (21
10603
Wax applicator bonnets (4)
10609
Cleaner/Glaze (8 oz.)
10996
Clear Pro™ Wax (8 oz.)
10995
Wax (8 oz.)
10998
OPERATION
Before you begin, make sure your car is
clean and dry. The work area should be dry
also. If necessary, remove road tar with a
general cleaner before polishing. Also,
remove excess grease spots, bug stains, etc.
NOTE; The Wax & Polishing Solution
containers shown in the illustrations are
representative. Yours may look different.
Place the blue wax applicator bonnet on
pad as shown. Make sure the elastic is
tucked down securely and evenly arourid
the underside of the pad.
B FOR PASTE WAX
Spread about a heaping teaspoonful of wax
evenly over the entire surface of the wax
applicator bonnet Use a putty knife or any
flat object. DO NOT APPLY WAX DIRECTLY
TO CAR.