Craftsman 358.79104 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

^WARNING: Stop unit and dis
connect the spark plug before per
forming maintenance {except carbure
tor adjustments).
• Look for and replace damaged or
loose parts before each use. Look
for and repair fuel leaks before use.
Keep in good working condition.
• Replace trimmer head parts that are
chipped, cracked, broken, or dam
aged in any other way before using
the unit.
• Maintain unit according to recom
mended procedures. Keep cutting
line at proper length.
• Use only Craftsman® brand replace
ment line. Never use wire, rope,
string, etc.
• Install required shield properly before
using the unit. Use only specified trim
mer head; make sure it is properly
installed and securely fastened.
• Make sure unit is assembled cor
rectly as shown in this manual.
• Make carburetor adjustments with
lower end supported to prevent line
from contacting any object,
• Keep others away when making car
buretor adjustments.
• Use only recommended Craftsman
accessories and replacement parts.
• Have all maintenance and service
not explained in this manual per
formed by a Sears Service Center.
FUEL SAFETY
• Mix and pour fuel outdoors.
• Keep away from sparks or flames,
• Do not smoke or allow smoking near
fuel or the unit or while using the unit.
• Avoid spilling fuel or oil. Wipe up all
fuel spills before starting engine.
• Move at least 10 feet (3 meters)
away from fueling site before start
ing engine. Stop engine and allow it
to cool before removing fuel cap.
• Empty the fuel tank before storing or
transporting the unit. Use up fuel left
in the carburetor by starting the en
gine and letting it run until it stops.
• Store unit and fuel in area where fuel
vapors cannot reach sparks or open
flames from water heaters, electric
motors or switches, furnaces, etc.
• Always store gasoline in a container
approved for flammable liquids.
UNIT / MAINTENANCE SAFETY
TRANSPORTING AND STORAGE
• Stop the unit before carrying.
• Allow engine to cool before storing
or transporting in vehicle,
• Empty the fuel tank before storing or
transporting the unit. Use up fuel left
in the carburetor by starting the en
gine and letting it run until it stops.
• Store unit and fuel in area where
fuel vapors cannot reach sparks or
open flames from water heaters,
electric motors or switches, furnaces,
etc.
• Store unit so line limiter blade can
not accidentally cause injury. The
unit can be hung by the shaft.
• Store unit out of reach of children.
This unit is not equipped with an anti
vibration system and is intended for
occasional use only.
SAFETY NOTICE;
Exposure to vibra
tions through prolonged use of gaso
line powered hand tools could cause
blood vessel or nerve damage in the
fingers, hands, and joints of people
prone to circulation disorders or ab
normal swellings. Prolonged use in
cold weather has been linked to blood
vessel damage in otherwise healthy
people. If symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or
joints, discontinue the use of this tool
and seek medical attention. An anti
vibration system does not guarantee
the avoidance of these problems. Us
ers who operate power tools on a con
tinual and regular basis must monitor
closely their physical condition and the
condition of this tool.
SPECIAL NCTICE:
This unit is
equipped with a temperature limiting
muffler and spark arresting screen
which meets the requirements of Cali
fornia Codes 4442 and 4443. AIIU.S.
forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey,
Oregon, and Washington require by
law that many internal combustion en
gines be equipped with a spark arrest
ing screen. If you operate in a locale
where such regulations exist, you are
legally responsible for maintaining the
operating condition of these parts.
Failure to do so is a violation of the
law. For normal homeowner use, the
muffler and spark arresting screen will
not require any service. After 50 hours
of use, we recommend that your muf
fler be serviced or replaced by a
Sears Service Center,