Craftsman 486.24515 - Manual (Page 3)

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate
the equipment. Exercise caution at all times, when using power equipment.
Read and follow all instructions in this manual before
attempting to assemble or operate this equipment. Failure
to comply with these Instructions may result in personal
injury. Keep this manual in a safe place for future reference
and for ordering replacement parts.
Read this operating and service instruction manual
carefully. Be thoroughly familiar with the controls and
proper use of this power vacuum.
Read the vehicle owners manual and vehicle safe
operation rules before using this equipment.
Never allow children under 16 to operate this Chipper Vac.
Children 16 years and older should only operate under
close parental supervision.
Do not allow anyone to operate this equipment without
proper instructions.
Do not allow passengers to ride on this equipment or on
the towing vehicle.
Keep the area of operation clear of all persons, particularly
small children. Also keep area clear of pets.
Check fuel before starting engine. Do not fill fuel tank
indoors, or when engine is running, or while engine is hot.
Wipe off any spilled fuel before starting engine.
Engine and muffler get hot. Do not touch! To avoid fire
hazard, keep clean of debris and other accumulations.
Never store Mow-N-Vac with fuel in tank. Allow engine to
cool before storing in any enclosure.
Do not change engine governor settings.
Do not operate engine if air cleaner or cover is removed,
except for adjustment. Removal of these parts could create
a fire hazard.
Keep hands, feet, face, long hetir and clothing out of
chipper inlet, vac inlet and discharge area. There are
ROTATING BLADES inside these openings.
Before deeming, repairing or inspecting, make certain all
moving parts come to a complete stop. Disconnect spark
plug wire and keep wire away from plug to prevent acci­
dental starting. Keep throttle control lever in stop position.
If the Chipper Vac should become blocked with debris at
any point, shut engine off and wait until the impeller comes
to a complete stop before attempting to remove the
obstruction. Disconnect spark plug wire to prevent acciden­
tal starting.
if the cutting mechanism strikes a foreign object, or if your
Chipper Vac should start to vibrate abnormally, stop the
engine immediately, disconnect the spark plug wire and
move the wire away from the spark plug. Allow the ma­
chine to stop and take the following steps.
a. Inspect for damage.
b. Repair or replace any damaged parts.
c. Check for loose parts and tighten to assure
continued sate operation.
Check alt bolts for tightness at frequent intervals to help
insure safe operation.
Check vinyl hard top boot frequently for wear. Replace if
worn or damaged.
Never operate Chipper Vac unless deck adapter, hose,
hose adapter (nozzle), discharge chute (elbow), chipper
chute and top cover are properly attached in their place.
Do not remove top cover or attempt to empty contents of
cart while engine is running.
Never attempt to change hose adapter (nozzle) or to
install remote hose attachment when engine is running.
Keep all shields and guards (e.g. chipper chute, discharge
chute (elbow) and hose adapter (nozzle) in place and
securely attached.
Always wear safety glasses or other suitable eye
protection when operating or maintaining this equipment.
Wear protective gloves when feeding material into the
chipper chute. Avoid loose fitting clothing.
Keep face and body clear of the chipper chute to avoid
accidental bounce back of any material.
When feeding material into this equipment, be extremely
careful that pieces of metal, rocks bottles, cans or other
foreign objects are not included. Personal injury or
damage to the machine could result.
Do not stand behind cart in exhaust discharge area while
engine is running.
Do not operate this equipment while intoxicated or while
taking drugs or medication that impairs the senses and
reactions.
When using this equipment, start with the vehicle
transmission in first (low) gear and then gradually
increase speed only as conditions permit.
Operate this equipment at reduced speed on rough
terrain, along creeks and ditches and on slopes to
prevent tipping or loss of control. Do not drive too close
to a creek or ditch.
Vehicle braking and stability are affected by the addition
of this equipment. Do not fill the Chipper Vac to its full
capacity without checking the capability of the towing
vehicle to safely pull and stop with the Chipper Vac
attached.
Before operating on any grade (hilt) refer to the safety
rules In the vehicle owner's manual concerning safe
operation on slopes. Also refer to the SLOPE GUIDE on
page 31 of this owner's manual. Do not operate on
slopes in excess of 10 degrees. STAY OFF STEEP
SLOPES.
Follow the maintenance instructions outlined in this
manual.
Look for this symbol to point out important safety precautions. It means-Attention!! Become alert!!
Your safety is involved.
A
DANGER: This Chipper Vac was built to be operated according to the rules for safe operation in
this manual. As with any type of power equipment, carelessness or error on the part of the opera­
tor can result in serious injury. This unit is capable of amputating fingers and hands and throwing
objects. Failure to observe the following safety instructions could result in serious injury or death.