Installation step 3 – Craftsman 139.53975SRT User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation Step 3

Attach the Rail to the Header Bracket

■

Header Wall

Header Bracket

NOTE: (Optional) With an existing Craftsman
installation, you may re-use the oid header bracket
with the two plastic spacers included in the hardware
bag. Place the spacers inside the bracket on each
side of the rail, as illustrated,

• Position the opener on the garage floor below the

header bracket. Use packing material as a
protective base.

If the door spring is in the way you'll need help.

Have someone hold the opener securely on a

temporary support to allow the rail to ciear the

spring.

• Position the front rail end within the header bracket

and join with a 5/16"x1-1/2“ clevis pin as shown.

• Insert a ring fastener to secure.

OPTION WITH

BCISTING CRAFTSMAN

INSTALLATION

Hardware Shown Actual Size

Clevis Pin 5/16"x;l'1/2“

Ring fastener

This manual is related to the following products:

139.53962 SRT