Features, Know your drill-driver, Wrist strap – Craftsman 973.114240 User Manual
Page 8: Unpackin, Instructions, Introduction, Unpacking -9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FEATURES
SPECIFICATIONS
Chuck Capacity
Motor
Charger Rating
No Load Speed
3/8 in.
14.4 Volts DC
120 Volts, 60 HZ, AC Only
0
- 600/min.
Switch
Charge Rate
Maximum Torque
Variable Speed - Reversible
3 -
6
Hours
100
in./lb.
KNOW YOUR DRILL-DRIVER
See Figure
1
.
Before attempting to use any tool, familiarize yourself
with all operating features and safety requirements.
SCREWDRIVER BITS
WRIST STRAP
See Figure
1
.
A wrist strap is provided to reduce the chances of
dropping your drill-driver. Place one hand through the
wrist strap when carrying tool.
BIT
STORAGE
LEVEL
BATTERY PACK
BATTERY CHARGER
KEYLESS
CHUCK
BIT
STORAGE
FORWARD
REVERSE
SELECTOR
BATTERY PACK
SHOWN IN TOOL
WRIST STRAP
Fig. 1
WARNING:
If any parts are missing, do not operate tool until the missing parts are replaced. Failure to
do so could result in possible serious personal injury.
UNPACKIN
j
INSTRUCTIONS
When unpacking the tool:
■ Carefully remove the tool and accessories from the
box.
■ Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1 -800-932-3188 for assistance.