Craftsman 973.114240 - Manual (Page 6)

SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGN ATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
O/
Alternating Current Type of current
— Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
H
Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per
minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and under
stand operator’s manual before using this product.
o
Eye Protection
Always wear safety goggles or safety glasses with side
shields and a full face shield when operating this
product.
A
Safety Alert Precautions that involve your safety.
®
No Hands Symbol Failure to keep your hands away from the blade will
result in serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will
result in serious personal injury.
#
No Hands Symbol
Failure to keep your hands away from the blade will
result in serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will
result in serious personal injury.