To transport, Towing carts and other attachments – Craftsman 917.271023 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• The average lawn should be cut to
approximately 2-1/2 inches during the
cool season and to over 3 inches during
hot months. For healthier and better
looking lawns, mow often and after
moderate growth.
• For best cutting performance, grass
over 6 inches in height should be
mowed twice. Make the first cut relative
ly high; the second to desired height.
TO OPERATE MOWER
Your tractor is equipped with an operator
presence sensing switch. Any attempt by
the operator to leave the seat with the
engine running and the attachment clutch
engaged will shut off the engine.
• Select desired height of cut.
• Start mower blades by engaging attach
ment clutch control.
• TO STOP MOWER BLADES - disen
gage attachment clutch control.
i^CAUTION: Do not operate the mower
without either the entire grass catcher, on
mowers so equipped, or the discharge
guard in place.
Attachment
Clutch
Lever
"Engaged"
Position
“DisengagecT
Position
Attachment Lift
Lever High Position
Low
Position
Discharge
Guard
TO OPERATE ON HILLS
^CAUTION: Do not drive up or down
hilts witK slopes greater than 15° and do
not drive across any slope. Use the slope
guide provided at the badroHhis manual.
• Choose the slowest speed before start
ing up or down hills.
• Avoid stopping or changing speed on
hills.
• If slowing is necessary, move throttle
control lever to slower position,
• If stopping is absolutely necessary, push
clutch^rake pedal quickly to brake posi
tion and engage par1 • Move motion control lever to neutral (N) position. IMPORTANT: The motion control lever when the clutch/brake pedal is depressed. • To restart movement, slowly release parking brake and clutch/brake pedal. • Slowly move motion control lever to slowest setting. • Make all turns slowly. TO TRANSPORT When pushing or towing your tractor, be Freewheel control is located at the rear with attachment lift control. • Pull freewheel control knob out and hold in position by inserting retainer spring • Do not push or tow tractor at more than two (2) MPH. • To reengage transmission, reverse above procedure. NOTE: To protect hood from damage when transporting your tractor on a truck or a TOWING CARTS AND OTHER Tow only the attachments that are recom mended by and comply with specifications common sense when towing. Too heavy of BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL shipped, from the factory, already filled • Check engine oil with tractor on level ground. 14
does not return to neutral (N) position
sure to disengage transmission by placing
freewheel control in freewheeling position.
drawbar of tractor.
• Raise attachment lift to highest position
into fonvard hole of control rod.
trailer, be sure hood is closed and secured
to tractor. Use an appropriate means of
tying hood to tractor (rope, cord, etc.).
ATTACHMENTS
of the manufacturer of your tractor. Use
a load, while on a slope, is dangerous.
Tires can lose traction with the ground and
cause you to lose control of your tractor.
• The engine in your tractor has been
with summer weight oil.