Craftsman 358.798340 - Manual (Page 9)

ASSEMBLY
CHECK LIST
• Check all fasteners. Make sure they are tight and there
are no loose parts.
• Make sure the blower tube is firmly seated in the blower
outlet.
» If you are using the unit as a blower, make sure the inlet
cover is latched.
• In blower mode, check to insure the nozzle is securely
seated
I n
the blower tube.
• If you are using your unit as a vacuum, make sure the
vacuum tubes are firmly connected, and positioned as
shown in the assembly illustrations.
• Make sure the collection bag is correctly adjusted with
the shoulder strap on your right shoulder.
• Make sure your extension cord is marked with a suffix of
“W-A”. fW” in Canada).
9 -