Know your electric blower, Double insulation construction, Operation – Craftsman 358.798340 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
KNOW YOUR ELECTRIC BLOWER
READ THIS OPERATOR’S MANUAL AND SAFETY
RULES
BEFORE
OPERATING
YOUR
ELECTRIC
BLOWER. Compare the illustrations with your unit to
familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
CONCENTRATOR NOZZLE
\
VACUUM TUBES
VACUUM BAG
The ON/OFF SWITCH is used to turn on the unit.
The INLET COVER LATCH is used to open the inlet cover
for attaching Upper Vacuum Tube.
The TOP HANDLE is used to hold the unit during the Blower
and Vacuum mode,
The REAR HANDLE is used to hold the unit during Vacuum
mode.
The CONCENTRATOR NOZZLE is use to direct the flow of
air into a concentrated area.
DOUBLE INSULATION CONSTRUCTION
A
WARNING
ALL ELECTRICAL REPAIRS TO THIS
UNIT, INCLUDING HOUSING, SWITCH,
MOTOR, ETC., MUST BE DIAGNOSED
AND REPAIRED BY QUALIFIED SER
VICE
PERSONNEL.
REPLACEMENT
PARTS FOR A DOUBLE INSULATED AP
PLIANCE MUST BE IDENTICAL TO THE
PARTS THEY REPLACE. A DOUBLE IN
SULATED APPLIANCE IS MARKED
WITH THE WORDS “DOUBLE INSULA
TION” OR “DOUBLE INSULATED”. THE
^MBOL (SQUARE WITHIN A SQUARE)
Q MAY ALSO BE MARKED ON THE AP
PLIANCE. FAILURE TO HAVE THE UNIT
REPAIRED BY QUAUFIED SERVICE
PERSONNEL
CAN
CAUSE
THE
DOUBLE INSULATION CONSTRUCTION
TO BECOME INEFFECTIVE AND RE
SULT IN SERIOUS INJURY.
This unit is Dout>le Insulated to help protect against
electric shock. Double insulation construction consists of
two separate layers” of electrical insulation instead of
grounding.
Tools and appliances built with a double insulation system
are not intended to be grounded. No grounding means is
provided on this unit, nor should a means of grounding be
added to this unit. As a result, the extension cord used with
your unit can be plugged Into any standard 120 voft electrical
outlet
Safety precautions must be observed when operating
any eiectrical tool.
The double insulation system only
provides added protection against injury resulting from an
internal electrical insulation failure.
10