Craftsman 917.257360 - Manual (Page 14)

MAINTENANCE
Check Brake Operation |/
Check Tire Pressure
R
A
C
Check for Loose Fasteners
Sharpen/Replace Mower Blades p/a
Lubricate Pivot Points i^-
...
1 Check Battery Level/Recharge
Clean Battery and Terminals
n R
Check Pump Assembly Fluid Level
i/
Check Transmission Cooling
—J
Check Engine Oil Level p/
Change Engine Oil %/
Clean Air Filter
N
Clean Air Screen —
G
1
N
inspect Muffler/Spark Arrester
Clean Engine Cooling Fins 1/2
Replace Spark Plug ✓
Replace Air Filter Paper Cartridge
Replace Fuel Filter L
1 - Change more often when operating under a heavy load or In high ambient temperatures
2 ■ Service more often whan operating in dirty or dusty conditions
3 - RepSace blades more often when mowing in sandy soil.
GENERAL RECOIVilVlENDATIONS
The warranty on this vehicle does not cover items that have
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
unit as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your unit.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season
• Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for
wear. A new spark plug and clean air^ filter assure
proper air-fue! mixture and help your engine run better
and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICATION CHART").
LUBRICATION CHART
14
IMPORTANT - Do not oil or grease the pivot points which have
special nylon bearings, Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating bearings. If you feel
they must be lubricated, use only a dry, powdered graphite type
lubricant sparingly.