Craftsman 315.115340 - Manual (Page 6)

SYMBOLS
Some of the foilowing symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta­
tion of these symbols will afiow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hr Hertz Frequerwy (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
- Direct Current туре or a characteristic of currertt
>io No Load Speed Rotationai speed, at no load
0 Class IJ Construction Double-insulated construction
..Jmin Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator's Manual
To reduce the risk of ln)ury, user must read and understand
operator's manual before using this product.
0
Eye Protection
Always wear safety goggles or safety glasses with side shields,
or a full face shield when operating №is product.
A Safety Alert Precautions that involve your safety.
No Hands Symbol
Failure to keep your hands away from the blade will result In
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious person^ injury.
(g) Hot Surface
To reduce the risk of injury or damage, avoid contact with
any hot surface.