Operation – Craftsman 315.115340 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

TO REMOVE BATTERY PACK

See

Figurs 3.

■ Look the switch trigger on the drill by placing the direc

tion of rotation selector In the center position.

■ Locate the latches on the side of the battery pack and

depress to release the battery pack ttom the drill.

■ Remove the battery pack from the drill.

TO INSTALL BATTERY PACK

See Figure s.

■ Lock the switch trigger on the drill by placing the direc

tion of rotation selector in the center position.

■ Place the battery pack in the drill. Align the raised rib

on the battery pack with the groove inside the drill.

CAUTION:

When placing battery pack m the tool,

be sure raised rib on battery pack aligns with the
bottom of the drill and latches into place properly.
Improper installation of the battery pack can cause
damage to internal components.

■ Make sure the latches on each side of the battery pack

snap into place and the battery pack is secured in the

drill before beginning operation.