Craftsman 315.212100 - Manual (Page 10)

FEATURES
KNOW YOUR COMPOUND MITER
SAW
See Figure 3.
Before attempting to use your saw, familiatize yourself
with all operating features and safety requirements.
A WARNING; Do not allow familiarity with your
saw to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
15 AMP MOTOR
Your saw has a powerful 15 amp motor with sufficient
power to handle tough cutting jobs. It is made eJI
ball bearings, and has externally accessible brushes
for ease of servicing.
10 In. BLADE
A10 in. saw blade is included with your compound
miter saw. It will cut materials up to 2-5№ in. thick or
5-3/4 in. wide, depending upon the thldmess of the
material and №e setting at ^ich the cut is being
made.
CUTTING CAPACITIES
When the miter angle (miter table) Is set at 0° and
the bevel angle Is set at 0°:
Your saw will cut materials up to a maximum of
5-3/4 in. wide X 2-5/8 in. thick.
When the miter angle (miter table) is set at 45° and
the bevel angle is set at 0°:
Your saw will cut materials up to a maximum of
4- 1/4 in. wide X 2-5/8 in. thick.
When the miter angle (miter table) Is set at 0° and
the bevel angle Is set at 45°:
Your saw will cut materials up to a maximum of
5- 3/4 in. wide X1-7/8 in. thick.
When the miter angle (miter table) Is set at 45° and
the bevel angle Is set at 45°:
Your saw will cut materials up to a maximum of
4*1/4 in. wide X 1-7/8 in. thick.
Fig.3