Settings, Voice/tone setting, Vg-2 and spectre i & iv alert settings – Cobra Electronics COBRA XRS 9550G User Manual
Page 10

English
14
Settings
Your Detector
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra
®
15
Your Detector
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Voice/Tone Setting
You can set your detector to sound alerts with either a
Voice or a Tone.
You can change settings by using the
Mute button.
In Voice Alert mode, you will first hear several tones, then a voice message
announcing the type of signal detected, followed by more tones. In Tone Alert mode,
you will hear the tones only. The factory setting is Voice Alert mode.
Mute Button
Press and Hold 2
To Change From Tone Alert Back to Voice Alert
While no signal
is being detected,
press and hold
the
Mute button
for two seconds
again.
Tone
Voice
Visual Display
None
Voice Alert
Voice Alert blinks in
the display
To Change From Voice Alert to Tone Alert
While no signal
is being detected,
press and hold
the
Mute button
for two seconds.
Tone
Voice
Visual Display
One beep
Tone Alert
Tone Alert blinks in
the display
VG-2 and Spectre I & IV Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from
VG-2, Spectre I and Spectre IV
RDDs and can provide alerts when any of these or similar devices are in use
near your vehicle.
Your detector
can be spotted by Spectre IV RDDs, but is invisible to VG-2 and
Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and Spectre
I & IV RDD signals. The factory setting for VG-2 and Spectre I & IV
alerts is Off.
IntelliMute Button
Press and hold for four seconds
To Turn VG-2 and Spectre I & IV Alerts On and Off
While no signal
is being detected,
press and hold the
IntelliMute button
for four seconds.
Tone
Voice
Visual Display
On = Two beeps
Spectre VG-2 On
Spectre I/VI & VG2 On
blinks in the display
Off = One beep
Spectre VG-2 Off
Spectre I/VI & VG2 Off
blinks in the display
Spectre
On
Off
& VG2
& VG2
Spectre I & IV
and VG-2 On
Spectre I & IV
and VG-2 Off