Craftsman 28928 - Manual (Page 31)

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE CORRECTION
Battery will not 1 Bad battery cell(s). 1 Replace battery.
charge
2 Poor cable connections. 2 Check/clean all connections.
3 Faulty regulator (if so equipped). 3 Replace regulator.
4 Faulty alternator. 4 Replace alternator.
Loss of drive 1 Freewheel control in “disengaged”
position. 1 Place freewheel control in
“engaged” position.
2 Motion drive belt worn, damaged,
or broken. 2 Replace motion drive belt.
3 Air trapped in transmission
during shipment or servicing.
3 Purge transmission.
Engine “backfires”
when turning
engine “OFF”
1 Engine throttle control not set
between half and full speed (fast)
position before stopping engine.
1 Move throttle control between
half and full speed (fast) position
before stopping engine.
Engine dies when
tractor is shifted
into reverse
1 Reverse operation system (ROS)
is not “ON” while mower or other
attachment is engaged.
1 Turn ignition key to ROS “ON”
position. See Operation section.
NEED MORE HELP?
th ?r an Il¥ll
Find this and all your other product manuals online.
Get answers from our team of home experts.
Get a personalized maintenance plan for your home.
Find information and tools to help with home projects.
brought to you by Sears
31