P) service reminder/hour meter – Craftsman 28928 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
TRACTOR
Compare
the
illustrations with your tractor to familiarize yourself with the locations of
various controls and adjustments. Save this manual for future reference.
HHi
Our tractors conform to the applicable safety standards of the
American National Standards Institute.
(A) ATTACHMENT LIFT LEVER - Used to
raise and lower the mower or other attach
ments mounted to your tractor.
(B) BRAKE PEDAL - Used for braking the
tractor and starting the engine.
(C) PARKING BRAKE - Locks clutch/brake
pedal into the brake position.
(D) THROTTLE/CHOKE CONTROL- Used
for starting and controlling engine speed.
(E)
ATTACHMENTCLUTCH LEVER-Used
to engage the mower blades, or other attach
ments mounted to your tractor.
(F) IGNITION SWITCH - Used for starting
and stopping the engine.
(G) REVERSEOPERATION SYSTEM (ROS)
" ON" POSITION - Allows operation of mower
or other powered attachment while in reverse.
(H) LIGHT SWITCH - Turns the headlights
on and off.
(J) CRUISE CONTROL LEVER - Used to set
forward movement oftractor at desired speed
without holding the forward drive pedal.
(K) FORWARD DRIVE PEDAL - Used for
forward movement of tractor.
(L) REVERSE DRIVE PEDAL - Used for
reverse movement of tractor.
(M)
FREEWHEELCONTROL-
Disengages
transmission for pushing or slowly towing the
tractor with the engine off.
(P) SERVICE REMINDER/HOUR METER
- Indicates when service is required for the
engine and mower.
10